La lib socket — TCP, UDP, AF_UNIX, Framing, DNS RFC 1035 i Kernel Sockets (RGF-001)

35.1. Per què existeix la lib socket? (El problema real i la filosofia Ridgun)

«Per què necessito una lib socket escrita des de zero en Ridgun pur en lloc d'enllaçar una llibreria de C de tota la vida?»

Aquesta és la primera pregunta que es fa qualsevol enginyer de sistemes en arribar a socket. I la resposta resumeix tota la filosofia de ridgun-libs:

Siguem sincers: programar sockets BSD en C amb struct sockaddr_in, htons, inet_pton i getaddrinfo (que a més arrossega libnss de glibc) és un ritual arcà dels anys 80.

La lib socket ofereix dues capes complementàries sense ni una línia de C: (1) l'API de descriptors del nucli RGF-001 per a servidors de producció com Solstice (sys tcp listen, sys tcp listen reuseport, sys accept, sys tcp connect, sys send, sys recv, sys resolve ipv4 mitjançant /etc/hosts + paquets DNS UDP RFC 1035 al port 53) i (2) la màquina d'estats funcional immutable Socket amb framing prefixat per longitud, línies CRLF i subxarxes CIDR.

En un ecosistema tradicional, resoldre les tasques del domini SOCK implica arrossegar dependències externes en C, lluitar amb punters crus, conversions opaques de tipus, excepcions no verificades o pauses impredictibles del recol·lector de brossa. En Ridgun, la lib socket (src/main/ridgun/lib/socket.rg) aborda el problema amb quatre principis innegociables:

1. Declara import socket (o import socket as alias) a l'inici del fitxer: cada lib defineix el seu espai de noms module :: socket i en mode --strict les funcions multi-paraula s'invoquen sempre amb espais naturals.
2. Encadena les teves canonades d'esquerra a dreta amb ->: escriu entrada pas u -> pas dos -> resultat, fes servir màscares (+ _ _ +) per desestructurar seqüències i omet _ = en sentències seqüencials (o descarta amb -> ()).
3. Recursió de cua amb TCO (Tail-Call Optimization): tots els recorreguts interns de socket es compilen a bucles natius en espai de pila $O(1)$.
4. Memòria determinista (RMM1 / RMM2): cada estructura intermèdia s'allibera en l'instant exacte en què acaba la seva última lectura, sense Garbage Collector.

---

35.2. Artefactes natius, importació i catàleg complet de l'API de socket

A ridgun-libs, socket és una lib de primera classe situada a src/main/ridgun/lib/socket.rg (domini SOCK). En compilar amb stable bundle, s'empaqueta en tres formats natius:

Artefacte	Ruta	Propòsit
Bundle Ridgun	target/bundles/socket.rglib	Distribució i importació directa amb import socket
Fitxer compilat	target/socket.rgc	Artefacte intermedi verificat per ridgunc
Objecte compartit ELF64	target/libsocket.so	Biblioteca dinàmica nativa sense dependències de C ni libc

Cada lib declara el seu propi espai de noms amb module :: socket: n'hi ha prou d'escriure import socket (o import socket as alias) a la capçalera i cridar les seves funcions amb espais naturals (la meva funcio x) i canonades -> (x la meva funcio -> resultat).

35.2.1. Resum de famílies funcionals de socket

Signatura / Funció / Tipus	Què fa i quan fer-la servir
sys tcp listen / sys tcp listen reuseport / sys unix listen	Enllaça i escolta en TCP IPv4 (SO_REUSEADDR / SO_REUSEPORT) o AF_UNIX
sys accept / sys tcp connect / sys unix connect	accept i connect acotats per timeout retornant SockFdResult / SockAcceptResult
sys send / sys recv / sys shutdown write	Enviament, recepció i tancament d'escriptura (SHUT_WR) de socket amb timeout
sys resolve ipv4 / dns resolve a	Resolució IPv4 pura en Ridgun mitjançant /etc/hosts i consultes DNS UDP RFC 1035
sock send frame / sock recv frame / ipv4 in cidr	Framing prefixat per longitud (N:payload) i coincidència de subxarxes CIDR IPv4

35.2.2. Catàleg exhaustiu de tipus i signatures a src/main/ridgun/lib/socket.rg

A continuació tens l'inventari complet de tipus algebraics (type), operadors (op ::) i signatures de funcions (fn ::) definits a src/main/ridgun/lib/socket.rg (10 tipus, 0 operadors i 183 funcions):

Tipus algebraics i registres (type) de socket:

type SockAddr = family: String, host: String, port: Int, path: String
type SockOpts = reuse_addr: Bool, keep_alive: Bool, non_blocking: Bool, tcp_nodelay: Bool, broadcast: Bool, timeout_ms: Int, rcvbuf: Int, sndbuf: Int
type SockPoll = readable: Bool, writable: Bool, has_error: Bool
type Socket   = family: String, sock_id: Int, sock_type: String, local_addr: SockAddr, remote_addr: SockAddr, opts: SockOpts, is_open: Bool, is_listening: Bool, is_connected: Bool, can_read: Bool, can_write: Bool, rx_buf: [Int], tx_buf: [Int], dgram_sender: SockAddr
type SockAddrRes      = SockAddrOk SockAddr | SockAddrErr String
type SockRes          = SockOk Socket | SockErr String
type SockPairRes      = SockPairOk Socket Socket | SockPairErr String
type SockRecvBytesRes = SockBytesOk Socket [Int] | SockBytesErr String
type SockRecvStrRes   = SockStrOk Socket String | SockStrErr String
type SockRecvFromRes  = SockFromOk Socket [Int] SockAddr | SockFromErr String

#	Funció / Signatura (fn ::)	Tipus de Retorn
1	fn :: int list len [Int]	Int
2	fn :: str list len [String]	Int
3	fn :: nth str [String] Int	String
4	fn :: take ints [Int] Int	[Int]
5	fn :: drop ints [Int] Int	[Int]
6	fn :: all valid bytes [Int]	Bool
7	fn :: str to bytes loop String Int Int	[Int]
8	fn :: str to byte list String	[Int]
9	fn :: byte list to str [Int]	String
10	fn :: find sub at String String Int Int Int	Int
11	fn :: find str index String String	Int
12	fn :: split by char loop String Int Int Int Int	[String]
13	fn :: split by char String Int	[String]
14	fn :: is valid port Int	Bool
15	fn :: is ascii digit Int	Bool
16	fn :: is digit range String Int Int	Bool
17	fn :: is all digits String	Bool
18	fn :: check octet range Int	Bool
19	fn :: is valid octet String	Bool
20	fn :: all valid octets [String]	Bool
21	fn :: is valid ipv4 parts [String]	Bool
22	fn :: is valid ipv4 String	Bool
23	fn :: is hex colon Int	Bool
24	fn :: check ipv6 chars String Int Int	Bool
25	fn :: is valid ipv6 String	Bool
26	fn :: is hostname char Int	Bool
27	fn :: check hostname chars String Int Int	Bool
28	fn :: is valid hostname String	Bool
29	fn :: sk lower char String Int Int	String
30	fn :: sk to lower loop String Int Int	String
31	fn :: sk to lower String	String
32	fn :: sk is ws Int	Bool
33	fn :: sk split ws loop String Int Int Int Bool	[String]
34	fn :: sk strip comment String Int	String
35	fn :: sk list has host [String] String	Bool
36	fn :: sk match hosts tokens [String] String	String
37	fn :: sk search hosts after found String [String] String	String
38	fn :: sk search hosts lines [String] String	String
39	fn :: sk file exists (Bool String Int Int Int String String Int String)	Bool
40	fn :: sk lookup etc hosts String	String
41	fn :: sk check valid ipv4 String	String
42	fn :: sk match resolv tokens [String]	String
43	fn :: sk search resolv after found String [String]	String
44	fn :: sk search resolv lines [String]	String
45	fn :: sk system nameserver	String
46	fn :: sk encode qname label String Int [String]	String
47	fn :: sk encode qname [String]	String
48	fn :: sk build dns query String	String
49	fn :: sk skip dns name step String Int Int Int	Int
50	fn :: sk skip dns name String Int Int	Int
51	fn :: sk check dns rdata String Int Int Int Int Int Int	String
52	fn :: sk parse dns after name String Int Int Int	String
53	fn :: sk parse dns answers String Int Int Int	String
54	fn :: sk extract dns after ancount String Int Int	String
55	fn :: sk extract dns after len String Int	String
56	fn :: sk extract dns ipv4 String	String
57	fn :: sk read dns after poll Int Int	String
58	fn :: sk udp dns query String String Int	String
59	fn :: sk resolve after dns String	Int String
60	fn :: sk resolve after hosts String String	Int String
61	fn :: sys resolve ipv4 String	Int String
62	fn :: sk wrap resolved host (Int String) Int	SockAddrRes
63	fn :: sock resolve host String Int	SockAddrRes
64	fn :: ipv4 to u32 String	Int
65	fn :: pow2 Int	Int
66	fn :: match cidr prefix String String Int	Bool
67	fn :: ip in cidr at String String Int	Bool
68	fn :: ip in cidr String String	Bool
69	fn :: has unsafe path char String	Bool
70	fn :: is safe unix path String	Bool
71	fn :: sock addr ipv4 String Int	SockAddrRes
72	fn :: sock addr ipv6 String Int	SockAddrRes
73	fn :: sock addr unix String	SockAddrRes
74	fn :: parse port str String	Int
75	fn :: parse bracketed ipv6 at String Int	SockAddrRes
76	fn :: parse bracketed ipv6 String	SockAddrRes
77	fn :: parse host port ipv4 at String Int	SockAddrRes
78	fn :: parse host port ipv4 String	SockAddrRes
79	fn :: sock parse addr String	SockAddrRes
80	fn :: empty addr	SockAddr
81	fn :: default sock opts	SockOpts
82	fn :: new socket Int String String	Socket
83	fn :: sock tcp	Socket
84	fn :: sock tcp6	Socket
85	fn :: sock udp	Socket
86	fn :: sock udp6	Socket
87	fn :: sock unix stream	Socket
88	fn :: sock unix dgram	Socket
89	fn :: sock set options Socket SockOpts	SockRes
90	fn :: sock set timeout Socket Int	SockRes
91	fn :: sock set tcp nodelay Socket Bool	SockRes
92	fn :: sock set broadcast Socket Bool	SockRes
93	fn :: sock set buf sizes Socket Int Int	SockRes
94	fn :: sock local addr Socket	SockAddrRes
95	fn :: sock peer addr Socket	SockAddrRes
96	fn :: sock shutdown Socket String	SockRes
97	fn :: sock poll Socket	SockPoll
98	fn :: bind unix marker SockAddr	()
99	fn :: sock bind Socket SockAddr	SockRes
100	fn :: sock listen Socket Int	SockRes
101	fn :: sock connect Socket SockAddr	SockRes
102	fn :: sock accept Socket	SockRes
103	fn :: sock connect pair Socket Socket	SockPairRes
104	fn :: sock close Socket	SockRes
105	fn :: sock send bytes Socket [Int]	SockRes
106	fn :: sock send all Socket [Int]	SockRes
107	fn :: sock pipe transfer Socket Socket	SockPairRes
108	fn :: sock recv bytes Socket Int	SockRecvBytesRes
109	fn :: sock recv exact Socket Int	SockRecvBytesRes
110	fn :: sock send str Socket String	SockRes
111	fn :: sock recv str from SockRecvBytesRes	SockRecvStrRes
112	fn :: sock recv str Socket Int	SockRecvStrRes
113	fn :: sock send to Socket [Int] SockAddr	SockRes
114	fn :: sock deliver dgram Socket Socket	SockPairRes
115	fn :: sock recv from Socket Int	SockRecvFromRes
116	fn :: encode be32 Int	[Int]
117	fn :: decode be32 [Int]	Int
118	fn :: sock send frame Socket [Int]	SockRes
119	fn :: unpack frame body Socket [Int] Int Int	SockRecvBytesRes
120	fn :: unpack frame buf Socket [Int] Int	SockRecvBytesRes
121	fn :: sock recv frame Socket Int	SockRecvBytesRes
122	fn :: find newline idx [Int] Int	Int
123	fn :: sock send line Socket String	SockRes
124	fn :: unpack line buf Socket [Int] Int Int	SockRecvStrRes
125	fn :: sock recv line Socket Int	SockRecvStrRes
126	fn :: sk raw byte ub Int	String
127	fn :: sk raw byte Int	String
128	fn :: sk u64 le Int	String
129	fn :: sk decode u16 le String Int	Int
130	fn :: sk decode u16 be String Int	Int
131	fn :: sk decode u32 le String Int	Int
132	fn :: sk alloc page Int	Int
133	fn :: sk free page Int Int Int	Int
134	fn :: sk alloc mfd	Int
135	fn :: sk poke Int Int String	Int
136	fn :: sk peek Int Int Int	String
137	fn :: is valid listen host String	Bool
138	fn :: sk ipv4 bytes String Bool	String
139	fn :: sk build sockaddr in String Int Bool	String
140	fn :: sk finish tcp listen Int Int Int	Int Int
141	fn :: sk apply reuseport Int Int Int Bool	Int
142	fn :: sk exec tcp listen opt String Int Int Bool	Int Int
143	fn :: sk exec tcp listen String Int Int	Int Int
144	fn :: sk map setsockopt rc Int	Int
145	fn :: sys set reuseport Int Bool	Int
146	fn :: sys tcp listen opt String Int Int Bool	Int Int
147	fn :: sys tcp listen reuseport String Int Int	Int Int
148	fn :: sys tcp listen String Int Int	Int Int
149	fn :: sk finish unix listen Int Int Int	Int Int
150	fn :: sk exec unix listen String Int	Int Int
151	fn :: sys unix listen String Int	Int Int
152	fn :: sk extract local port Int String	Int
153	fn :: sys local port Int	Int
154	fn :: sk finish connect Int Int	Int Int
155	fn :: sk exec tcp connect ip String Int	Int Int
156	fn :: sk connect resolved (Int String) Int	Int Int
157	fn :: sys tcp connect String Int Int	Int Int
158	fn :: sys unix connect String Int	Int Int
159	fn :: sk decode acceptconn Int String	Int
160	fn :: sk sock acceptconn Int	Int
161	fn :: sk format peer ip String	String
162	fn :: sk finish accept Int String	Int Int String
163	fn :: sk accept after poll Int Int	Int Int String
164	fn :: sys accept Int Int	Int Int String
165	fn :: sk clamp nonneg Int	Int
166	fn :: sk send rem ms Int Int	Int
167	fn :: sk send after rc Int Int Int Int Int Int Int	Int Int
168	fn :: sk send after poll Int Int Int Int Int Int Int	Int Int
169	fn :: sk send loop Int Int Int Int Int Int	Int Int
170	fn :: sk exec send Int String Int	Int Int
171	fn :: sys send Int String Int	Int Int
172	fn :: sys shutdown write Int	Int
173	fn :: sk wrap recv chunk String	Int String
174	fn :: sk recv after poll Int Int Int	Int String
175	fn :: sys recv Int Int Int	Int String
176	fn :: sock rc (Int Int)	Int
177	fn :: sock fd (Int Int)	Int
178	fn :: sock accept rc (Int Int String)	Int
179	fn :: sock accept fd (Int Int String)	Int
180	fn :: sock accept ip (Int Int String)	String
181	fn :: sock recv rc (Int String)	Int
182	fn :: sock recv data (Int String)	String

---

35.3. Explorant socket a fons: Exemples pas a pas de cada funcionalitat

No n'hi ha prou de veure la taula de signatures: explorarem cadascuna de les funcionalitats de la lib socket mitjançant exemples progressius i executables en Ridgun. Començarem per les dues receptes tabulars d'ús quotidià i després recorrerem en detall tots els escenaris funcionals, transformacions i casos límit verificats a src/test/ridgun/test socket.rg.

35.3.1. Exemple 1: Flux principal en estil tabular amb socket

Observa com en Ridgun els signes = i els passos de transformació amb socket queden alineats com una taula neta, sense variables mutables innecessàries ni efectes laterals ocults:

import socket

fn :: eco tcp local => String
      eco tcp local =
        sys tcp listen "127.0.0.1" 0 16 -> (_ +) -> lfd
        lfd sys local port -> port
        sys tcp connect "127.0.0.1" port 1000 -> (_ +) -> cfd
        sys accept lfd 1000 -> a_res
        a_res sock accept fd -> sfd
        sys send cfd "hola-solstice" 1000 -> ()
        sys recv sfd 64 1000 -> r_res
        r_res sock recv data -> datos
        sys close cfd -> ()
        sys close sfd -> ()
        sys close lfd -> ()
        datos

35.3.2. Exemple 2: Composició segura i gestió de casos de vora

Tota funció de la lib socket està dissenyada per compondre's amb guardes booleanes | i amb la resta de les 32 libs de ridgun-libs:

import socket

fn :: verificar ip interna String => Bool
      verificar ip interna ip =
        ip in cidr ip "10.0.0.0/8"

35.3.3. Exemple 3: Adreces tipades (IPv4, IPv6, Unix), validació de ports i cicle de vida complet de sòcols (tcp listen, accept, connect, close)

En aquest exemple pràctic explorem de manera exhaustiva com es comporta socket en aquest bloc funcional, incloent-hi entrades estàndard, combinacions de paràmetres i valors frontera:

fn :: test sock address and lifecycle => ()
      test sock address and lifecycle =
        r_v4       = sock parse addr "127.0.0.1:8080"
        r_v6       = sock parse addr "[::1]:9090"
        r_ux       = sock parse addr "/tmp/ridgun_test.sock"
        b_ip       = sock parse addr "999.0.0.1:8080"
        b_prt      = sock addr ipv4 "127.0.0.1" 70000
        b_ux1      = sock parse addr "../unsafe.sock"
        b_ux2      = sock parse addr "/tmp/bad;rm.sock"
        assert ok (is addr ok r_v4)
        assert ok (is addr ok r_v6)
        assert ok (is addr ok r_ux)
        assert eq (is addr ok b_ip) False
        assert eq (is addr ok b_prt) False
        assert eq (is addr ok b_ux1) False
        assert eq (is addr ok b_ux2) False
        a_v4       = unwrap addr r_v4
        assert eq (host a_v4) "127.0.0.1"
        assert eq (port a_v4) 8080
        s0         = sock tcp
        s_to       = sock set timeout s0 2500
        s_neg      = sock set timeout s0 (-5)
        assert ok (is sock ok s_to)
        assert eq (is sock ok s_neg) False
        s1         = unwrap sock s_to
        assert eq (timeout_ms (opts s1)) 2500
        srv0       = unwrap sock (sock bind s1 a_v4)
        srv1       = unwrap sock (sock listen srv0 16)
        assert ok (is_listening srv1)
        cli0       = unwrap sock (sock bind (sock tcp) (unwrap addr (sock parse addr "127.0.0.1:50000")))
        pair       = sock connect pair cli0 srv1
        cli1       = unwrap pair left pair
        peer1      = unwrap pair right pair
        assert ok (is_connected cli1)
        assert ok (is_connected peer1)
        closed_cli = unwrap sock (sock close cli1)
        assert eq (is_open closed_cli) False
        assert eq (is sock ok (sock close closed_cli)) False
        -- Additional family, option, and lifecycle negative edge cases
        assert ok (is addr ok (sock parse addr "unix:/tmp/ridgun_prefixed.sock"))
        assert ok (is addr ok (sock addr ipv6 "::1" 8443))
        assert eq (is addr ok (sock addr ipv6 "invalid_v6" 8443)) False
        assert eq (is addr ok (sock parse addr "/tmp/bad|pipe.sock")) False
        assert eq (is addr ok (sock parse addr "/tmp/bad$dollar.sock")) False
        assert eq (is addr ok (sock parse addr "/tmp/bad space.sock")) False
        assert eq (family (sock tcp6)) "inet6"
        assert eq (family (sock udp6)) "inet6"
        assert eq (family (sock unix stream)) "unix"
        assert eq (sock_type (sock unix dgram)) "dgram"
        good_opts  = SockOpts True True True True False 1000 32768 32768
        bad_opts1  = SockOpts True False False False False (0 - 1) 32768 32768
        bad_opts2  = SockOpts True False False False False 1000 0 32768
        assert ok (is sock ok (sock set options (sock tcp) good_opts))
        assert eq (is sock ok (sock set options (sock tcp) bad_opts1)) False
        assert eq (is sock ok (sock set options (sock tcp) bad_opts2)) False
        assert eq (is sock ok (sock bind (sock tcp) (unwrap addr r_v6))) False
        assert eq (is sock ok (sock listen (sock tcp) 8)) False
        assert eq (is sock ok (sock listen srv0 0)) False
        assert eq (is sock ok (sock listen (sock udp) 8)) False
        assert eq (is sock ok (sock accept srv0)) False
        assert eq (is sock ok (sock connect (sock tcp) (unwrap addr r_ux))) False

35.3.4. Exemple 4: Transferència de fluxos (send all, recv exact), línies (send line, recv line), trames amb prefix de 32 bits (send frame u32be) i datagrames UDP

En aquest exemple pràctic explorem de manera exhaustiva com es comporta socket en aquest bloc funcional, incloent-hi entrades estàndard, combinacions de paràmetres i valors frontera:

fn :: test sock data transfer and framing => ()
      test sock data transfer and framing =
        srv_addr = unwrap addr (sock parse addr "127.0.0.1:8081")
        cli_addr = unwrap addr (sock parse addr "127.0.0.1:50001")
        srv      = unwrap sock (sock listen (unwrap sock (sock bind (sock tcp) srv_addr)) 8)
        cli      = unwrap sock (sock bind (sock tcp) cli_addr)
        pair0    = sock connect pair cli srv
        c0       = unwrap pair left pair0
        p0       = unwrap pair right pair0
        c1       = unwrap sock (sock send str c0 "hello ridgun")
        pair1    = sock pipe transfer c1 p0
        p1       = unwrap pair right pair1
        r_str    = sock recv str p1 64
        assert ok (is recv str ok r_str)
        assert eq (unwrap recv str r_str) "hello ridgun"
        p2       = unwrap recv str sock r_str
        c2       = unwrap sock (sock send frame (unwrap pair left pair1) [10, 20, 30, 40])
        pair2    = sock pipe transfer c2 p2
        p3       = unwrap pair right pair2
        r_frm_sm = sock recv frame p3 2
        assert eq (is recv bytes ok r_frm_sm) False
        r_frm_ok = sock recv frame p3 16
        assert ok (is recv bytes ok r_frm_ok)
        assert eq (unwrap recv bytes r_frm_ok) [10, 20, 30, 40]
        p4       = unwrap recv bytes sock r_frm_ok
        c3       = unwrap sock (sock send line (unwrap pair left pair2) "PING 1")
        pair3    = sock pipe transfer c3 p4
        p5       = unwrap pair right pair3
        r_line   = sock recv line p5 32
        assert ok (is recv str ok r_line)
        assert eq (unwrap recv str r_line) "PING 1"
        p6       = unwrap recv str sock r_line
        u_sender = unwrap sock (sock bind (sock udp) cli_addr)
        u_rcvr   = unwrap sock (sock bind (sock udp) srv_addr)
        u_sent   = unwrap sock (sock send to u_sender [1, 2, 3] srv_addr)
        d_pair   = sock deliver dgram u_sent u_rcvr
        u_rcvr2  = unwrap pair right d_pair
        d_res    = sock recv from u_rcvr2 16
        assert eq (unwrap dgram payload d_res) [1, 2, 3]
        assert eq (port (unwrap dgram sender d_res)) 50001
        -- Additional framing, line, byte-range, and datagram negative edge cases
        assert eq (is sock ok (sock send bytes c0 [0, 256])) False
        assert eq (is sock ok (sock send bytes c0 [0 - 1])) False
        c_short  = unwrap sock (sock send bytes (unwrap pair left pair3) [0, 1])
        p_short  = unwrap pair right (sock pipe transfer c_short p6)
        assert eq (is recv bytes ok (sock recv frame p_short 16)) False
        assert eq (is recv str ok (sock recv line p_short 16)) False
        c_longl  = unwrap sock (sock send line (unwrap pair left pair3) "LINE_TOO_LONG_FOR_LIMIT")
        p_longl  = unwrap pair right (sock pipe transfer c_longl (unwrap recv bytes sock (sock recv bytes p_short 2)))
        assert eq (is recv str ok (sock recv line p_longl 4)) False
        assert eq (is sock ok (sock send to c0 [1, 2] srv_addr)) False

35.3.5. Exemple 5: Opcions de sòcol (NODELAY, KEEPALIVE), subxarxes CIDR (ipv4 in cidr), resolució DNS (resolve host) i multiplexació sock select

En aquest exemple pràctic explorem de manera exhaustiva com es comporta socket en aquest bloc funcional, incloent-hi entrades estàndard, combinacions de paràmetres i valors frontera:

fn :: test sock advanced ops dns cidr and polling => ()
      test sock advanced ops dns cidr and polling =
        srv_addr  = unwrap addr (sock resolve host "localhost" 8082)
        cli_addr  = unwrap addr (sock resolve host "api.example.com" 50002)
        bad_host  = sock resolve host "-bad..host" 8082
        assert eq (host srv_addr) "127.0.0.1"
        assert eq (port srv_addr) 8082
        assert eq (is addr ok bad_host) False
        assert ok (ip in cidr "192.168.1.42" "192.168.1.0/24")
        assert eq (ip in cidr "192.168.2.42" "192.168.1.0/24") False
        assert ok (ip in cidr "10.20.30.40" "10.0.0.0/8")
        assert eq (ip in cidr "10.20.30.40" "10.0.0.0/99") False
        s_nd      = sock set tcp nodelay (sock tcp) True
        s_bc      = sock set broadcast (sock udp) True
        s_buf_ok  = sock set buf sizes (sock tcp) 131072 131072
        s_buf_bad = sock set buf sizes (sock tcp) 0 1024
        assert ok (is sock ok s_nd)
        assert ok (is sock ok s_bc)
        assert ok (is sock ok s_buf_ok)
        assert eq (is sock ok s_buf_bad) False
        assert ok (tcp_nodelay (opts (unwrap sock s_nd)))
        assert ok (broadcast (opts (unwrap sock s_bc)))
        assert eq (rcvbuf (opts (unwrap sock s_buf_ok))) 131072
        srv       = unwrap sock (sock listen (unwrap sock (sock bind (sock tcp) srv_addr)) 8)
        cli       = unwrap sock (sock bind (sock tcp) cli_addr)
        pair0     = sock connect pair cli srv
        c0        = unwrap pair left pair0
        p0        = unwrap pair right pair0
        assert eq (port (unwrap addr (sock local addr c0))) 50002
        assert eq (port (unwrap addr (sock peer addr c0))) 8082
        poll0     = sock poll p0
        assert eq (readable poll0) False
        assert ok (writable poll0)
        c1        = unwrap sock (sock send all c0 [5, 6, 7, 8, 9])
        pair1     = sock pipe transfer c1 p0
        p1        = unwrap pair right pair1
        poll1     = sock poll p1
        assert ok (readable poll1)
        ex_fail   = sock recv exact p1 10
        assert eq (is recv bytes ok ex_fail) False
        ex_ok     = sock recv exact p1 5
        assert ok (is recv bytes ok ex_ok)
        assert eq (unwrap recv bytes ex_ok) [5, 6, 7, 8, 9]
        c_shut_wr = unwrap sock (sock shutdown (unwrap pair left pair1) "wr")
        assert eq (is sock ok (sock send bytes c_shut_wr [1])) False
        p_shut_rd = unwrap sock (sock shutdown p1 "rd")
        assert eq (is recv bytes ok (sock recv bytes p_shut_rd 4)) False
        c_shut_all = unwrap sock (sock shutdown p1 "rdwr")
        assert eq (can_read c_shut_all) False
        assert eq (can_write c_shut_all) False
        assert eq (is sock ok (sock shutdown p1 "bad_mode")) False
        assert ok (is addr ok (sock resolve host "ip6-localhost" 9090))
        assert ok (ip in cidr "203.0.113.5" "0.0.0.0/0")
        assert ok (ip in cidr "192.168.1.1" "192.168.1.1/32")
        assert eq (ip in cidr "192.168.1.2" "192.168.1.1/32") False
        assert eq ( is addr ok (sock local addr (sock tcp))) False
        assert eq (is addr ok (sock peer addr (sock tcp))) False

fn :: tup2 fst (Int Int) => Int
      tup2 fst (a, _)    =  a

fn :: tup2 snd (Int Int) => Int
      tup2 snd (_, b)    =  b

fn :: tup2 str (Int String) => String
      tup2 str (_, s)       =  s

fn :: tup2 rc (Int String) => Int
      tup2 rc (rc, _)      =  rc

fn :: tup3 rc (Int Int String) => Int
      tup3 rc (rc, _, _)       =  rc

fn :: tup3 fd (Int Int String) => Int
      tup3 fd (_, fd, _)       =  fd

35.3.6. Exemple 6: Sòcols reals del kernel Linux x86_64 (RGF-001): client/servidor TCP en bucle local (127.0.0.1) i sòcols de domini Unix (AF_UNIX)

En aquest exemple pràctic explorem de manera exhaustiva com es comporta socket en aquest bloc funcional, incloent-hi entrades estàndard, combinacions de paràmetres i valors frontera:

fn :: test sock rgf001 kernel tcp and unix => ()
      test sock rgf001 kernel tcp and unix =
        -- 1. Ephemeral TCP listen + sys local port + ADDR_IN_USE + invalid/permission checks
        assert int equals (tup2 fst (sys tcp listen "bad_host" 8080 16)) (0 - 7) "invalid host -> -7"
        assert int equals (tup2 fst (sys tcp listen "127.0.0.1" 70000 16)) (0 - 7) "invalid port -> -7"
        assert int equals (tup2 fst (sys tcp listen "127.0.0.1" 8080 0)) (0 - 7) "invalid backlog -> -7"
        assert int equals (tup2 fst (sys tcp listen "127.0.0.1" 80 16)) (0 - 6) "privileged port 80 -> -6"
        l_res  = sys tcp listen "127.0.0.1" 0 16
        assert int equals (tup2 fst l_res) 0 "sys_tcp_listen status"
        lfd    = tup2 snd l_res
        assert true (lfd >= 0) "lfd >= 0"
        assert true ((sys call 72 lfd 1 0 0 0 0) >= 0) "lfd is real kernel fd (fcntl F_GETFD >= 0)"
        lport  = sys local port lfd
        assert true (lport > 0) "ephemeral port > 0"
        dup_l  = sys tcp listen "127.0.0.1" lport 8
        assert int equals (tup2 fst dup_l) (0 - 5) "dup sys_tcp_listen -> -5"

        -- 1b. Real DNS resolution (/etc/hosts + RFC 1035 wire packet parser + localhost + literal IP + hostname connect)
        r_loc  = sys resolve ipv4 "localhost"
        assert int equals (tup2 rc r_loc) 0 "sys_resolve_ipv4 localhost ok"
        assert str eq (tup2 str r_loc) "127.0.0.1" "sys_resolve_ipv4 localhost -> 127.0.0.1"
        r_bad  = sys resolve ipv4 "-bad..host"
        assert int equals (tup2 rc r_bad) (0 - 7) "sys_resolve_ipv4 invalid hostname -> -7"
        dns_q  = sk build dns query "example.com"
        assert int equals (str len dns_q) 29 "RFC 1035 DNS query length for example.com == 29"
        -- Construct an RFC 1035 DNS response packet with 1 A record (93.184.216.34) using 0xC00C name compression
        dns_hd = (sk raw byte 18) + (sk raw byte 52) + (sk raw byte 129) + (sk raw byte 128) + (sk raw byte 0) + (sk raw byte 1) + (sk raw byte 0) + (sk raw byte 1) + (sk raw byte 0) + (sk raw byte 0) + (sk raw byte 0) + (sk raw byte 0)
        dns_qn = sk encode qname ["example", "com"]
        dns_qt = (sk raw byte 0) + (sk raw byte 1) + (sk raw byte 0) + (sk raw byte 1)
        dns_an = (sk raw byte 192) + (sk raw byte 12) + (sk raw byte 0) + (sk raw byte 1) + (sk raw byte 0) + (sk raw byte 1) + (sk raw byte 0) + (sk raw byte 0) + (sk raw byte 0) + (sk raw byte 60) + (sk raw byte 0) + (sk raw byte 4) + (sk raw byte 93) + (sk raw byte 184) + (sk raw byte 216) + (sk raw byte 34)
        dns_ip = sk extract dns ipv4 (dns_hd + dns_qn + dns_qt + dns_an)
        assert str eq dns_ip "93.184.216.34" "sk_extract_dns_ipv4 parses RFC 1035 A record (93.184.216.34)"
        c_host = sys tcp connect "localhost" lport 500
        assert int equals (tup2 fst c_host) 0 "sys_tcp_connect via hostname localhost ok"
        a_host = sys accept lfd 500
        assert int equals (tup3 rc a_host) 0 "sys_accept from hostname connect ok"
        assert int equals (sys close (tup2 snd c_host)) 0 "close c_host"
        assert int equals (sys close (tup3 fd a_host)) 0 "close a_host"

        -- 2. Accept timeout (-2) when no client pending + connect refused (-3) on unbound port
        acc_to = sys accept lfd 30
        assert int equals (tup3 rc acc_to) (0 - 2) "sys_accept timeout -> -2"
        ref_c  = sys tcp connect "127.0.0.1" 39999 100
        assert int equals (tup2 fst ref_c) (0 - 3) "sys_tcp_connect refused -> -3"

        -- 3. TCP multi-client queue, bidirectional I/O, chunked recv, recv timeout (-2), shutdown_write, send after shutdown (-4), EOF (-1)
        c_res  = sys tcp connect "127.0.0.1" lport 500
        c_res2 = sys tcp connect "127.0.0.1" lport 500
        assert int equals (tup2 fst c_res) 0 "sys_tcp_connect 1 ok"
        assert int equals (tup2 fst c_res2) 0 "sys_tcp_connect 2 ok"
        cfd    = tup2 snd c_res
        cfd2   = tup2 snd c_res2
        a_res  = sys accept lfd 500
        a_res2 = sys accept lfd 500
        assert int equals (tup3 rc a_res) 0 "sys_accept 1 ok"
        assert int equals (tup3 rc a_res2) 0 "sys_accept 2 ok"
        sfd    = tup3 fd a_res
        sfd2   = tup3 fd a_res2

        -- Empty recv with timeout=20 returns (-2, "")
        rcv_to = sys recv sfd 16 20
        assert int equals (tup2 rc rcv_to) (0 - 2) "sys_recv timeout on idle stream -> -2"

        -- Chunked recv: send 10 bytes, read 4 + 4 + 2 bytes, plus reverse direction sfd -> cfd
        snd1   = sys send cfd "0123456789" 500
        assert int equals (tup2 fst snd1) 0 "sys_send status"
        assert int equals (tup2 snd snd1) 10 "sys_send len 10"
        ch1    = sys recv sfd 4 500
        ch2    = sys recv sfd 4 500
        ch3    = sys recv sfd 4 500
        assert str eq (tup2 str ch1) "0123" "chunk 1 (4B)"
        assert str eq (tup2 str ch2) "4567" "chunk 2 (4B)"
        assert str eq (tup2 str ch3) "89" "chunk 3 (2B)"
        assert int equals (tup2 fst (sys send sfd "pong" 500)) 0 "server->client send ok"
        assert str eq (tup2 str (sys recv cfd 16 500)) "pong" "client recv pong"

        -- Raw binary bytes (0, 1, 127, 128, 254, 255) + AEAD ciphertext over TCP sys send/sys recv
        raw_bin = bytes from list [0, 1, 127, 128, 254, 255]
        assert int equals (str len raw_bin) 6 "raw_bin len == 6"
        assert int equals (tup2 fst (sys send cfd2 raw_bin 500)) 0 "sys_send raw binary ok"
        r_bin   = tup2 str (sys recv sfd2 16 500)
        assert int equals (str len r_bin) 6 "raw binary recv len == 6"
        assert int equals (str char at r_bin 0) 0 "raw binary byte[0] == 0"
        assert int equals (str char at r_bin 1) 1 "raw binary byte[1] == 1"
        assert int equals (str char at r_bin 3) 128 "raw binary byte[3] == 128"
        assert int equals (str char at r_bin 5) 255 "raw binary byte[5] == 255"
        k32     = sha256 bytes "socket-session-key"
        n12     = "0123456789ab"
        ct_wire = aead seal k32 n12 "tcp-aad" "confidential-payload-over-tcp"
        assert int equals (tup2 fst (sys send cfd2 ct_wire 500)) 0 "sys_send AEAD ciphertext ok"
        rx_wire = tup2 str (sys recv sfd2 128 500)
        opened  = aead open k32 n12 "tcp-aad" rx_wire
        assert int equals (tup2 rc opened) 0 "aead_open over TCP socket ok"
        assert str eq (tup2 str opened) "confidential-payload-over-tcp" "decrypted TCP payload matches"

        -- Shutdown write -> subsequent send returns (-4, -1) RESET, peer recv returns (-1, "") EOF
        assert int equals (sys shutdown write cfd) 0 "sys_shutdown_write"
        assert int equals (tup2 fst (sys send cfd "after-shut" 100)) (0 - 4) "send after shutdown_write -> -4"
        rcv_ef = sys recv sfd 64 500
        assert int equals (tup2 rc rcv_ef) (0 - 1) "sys_recv EOF -> -1"
        assert int equals (sys close cfd) 0 "sys_close cfd"
        assert int equals (sys close sfd) 0 "sys_close sfd"
        assert int equals (sys close cfd2) 0 "sys_close cfd2"
        assert int equals (sys close sfd2) 0 "sys_close sfd2"
        assert int equals (sys close lfd) 0 "sys_close lfd"

        -- Operations on closed fd return -7 (INVALID)
        assert int equals (sys local port lfd) (0 - 7) "sys_local_port on closed lfd -> -7"
        assert int equals (tup3 rc (sys accept lfd 10)) (0 - 7) "sys_accept on closed lfd -> -7"
        assert int equals (tup2 fst (sys send cfd "x" 10)) (0 - 7) "sys_send on closed cfd -> -7"
        assert int equals (tup2 rc (sys recv sfd 16 10)) (0 - 7) "sys_recv on closed sfd -> -7"

        -- 4. AF_UNIX listen + connect + send + recv + path traversal (-7) + missing listener (-3)
        u_bad  = sys unix listen "../traversal.sock" 8
        assert int equals (tup2 fst u_bad) (0 - 7) "sys_unix_listen traversal -> -7"
        assert int equals (tup2 fst (sys unix connect "/tmp/rg_nonexistent_99999.sock" 50)) (0 - 3) "sys_unix_connect missing -> -3"
        upath  = "/tmp/rg_sock_rgf001_{sys_getpid}.sock"
        ul_res = sys unix listen upath 8
        assert int equals (tup2 fst ul_res) 0 "sys_unix_listen ok"
        ulfd   = tup2 snd ul_res
        uc_res = sys unix connect upath 500
        assert int equals (tup2 fst uc_res) 0 "sys_unix_connect ok"
        ucfd   = tup2 snd uc_res
        ua_res = sys accept ulfd 500
        assert int equals (tup3 rc ua_res) 0 "sys_accept unix ok"
        usfd   = tup3 fd ua_res
        assert int equals (tup2 fst (sys send ucfd "unix-msg" 500)) 0 "sys_send unix ok"
        urcv   = sys recv usfd 64 500
        assert int equals (tup2 rc urcv) 0 "sys_recv unix ok"
        assert str eq (tup2 str urcv) "unix-msg" "AF_UNIX sys_recv"
        assert int equals (sys close ucfd) 0 "sys_close ucfd"
        assert int equals (sys close usfd) 0 "sys_close usfd"
        assert int equals (sys close ulfd) 0 "sys_close ulfd"
        assert int equals (shell exec "rm -f '{upath}'") 0 "unlink AF_UNIX socket"

        -- 5. RG-049: sys send honours timeout_ms when peer never reads (8 MiB send with timeout_ms=1000)
        tl_res = sys tcp listen "127.0.0.1" 0 8
        tlfd   = tup2 snd tl_res
        tlport = sys local port tlfd
        tc_res = sys tcp connect "127.0.0.1" tlport 500
        tcfd   = tup2 snd tc_res
        ta_res = sys accept tlfd 500
        tsfd   = tup3 fd ta_res
        big8m  = str repeat "x" 8000000
        ts0    = sys time ms
        tsnd   = sys send tsfd big8m 1000
        ts1    = sys time ms
        dt_ms  = ts1 - ts0
        assert int equals (tup2 fst tsnd) (0 - 2) "RG-049: sys_send 8 MiB to non-reading peer times out -> -2"
        assert true ((tup2 snd tsnd) > 0) "RG-049: sys_send returns partial bytes sent > 0 on timeout"
        assert true (dt_ms >= 800 and dt_ms <= 2500) "RG-049: sys_send timeout elapsed ~1000 ms"
        assert int equals (sys close tcfd) 0 "sys_close tcfd"
        assert int equals (sys close tsfd) 0 "sys_close tsfd"
        assert int equals (sys close tlfd) 0 "sys_close tlfd"

        -- 6. Wish (multi-core): SO_REUSEPORT allows two TCP listeners on the same (ip, port)
        rp1    = sys tcp listen reuseport "127.0.0.1" 0 16
        assert int equals (tup2 fst rp1) 0 "sys_tcp_listen_reuseport 1 ok"
        rp_fd1 = tup2 snd rp1
        rp_prt = sys local port rp_fd1
        rp2    = sys tcp listen reuseport "127.0.0.1" rp_prt 16
        assert int equals (tup2 fst rp2) 0 "sys_tcp_listen_reuseport 2 on same port ok"
        rp_fd2 = tup2 snd rp2
        assert int equals (sys close rp_fd1) 0 "sys_close rp_fd1"
        assert int equals (sys close rp_fd2) 0 "sys_close rp_fd2"
        ()

---

35.4. Sota el capó: com està construïda socket en Ridgun pur (src/main/ridgun/lib/socket.rg)

Un dels majors avantatges de ridgun-libs és que no hi ha caixes negres en C. Pots obrir src/main/ridgun/lib/socket.rg i llegir exactament com està implementada cada operació fent servir pattern matching, arbres de guardes | / |. i recursió de cua (TCO). Vegem les peces clau de la seva implementació real:

35.4.1. Implementació interna: RGF-001 Tuple Accessor Helpers

Fixa't en com socket.rg estructura les signatures fn :: ... => ... primer i resol cada cas mitjançant equacions alineades i crides de cua:

module :: socket

fn :: sock rc (Int Int) => Int
      sock rc (rc, _)   =  rc

fn :: sock fd (Int Int) => Int
      sock fd (_, fd)   =  fd

fn :: sock accept rc (Int Int String) => Int
      sock accept rc (rc, _, _)       =  rc

fn :: sock accept fd (Int Int String) => Int
      sock accept fd (_, fd, _)       =  fd

fn :: sock accept ip (Int Int String) => String
      sock accept ip (_, _, ip)       =  ip

fn :: sock recv rc (Int String) => Int
      sock recv rc (rc, _)      =  rc

fn :: sock recv data (Int String) => String
      sock recv data (_, data)    =  data

---

35.5. Garanties algorísmiques, memòria RMM1/RMM2 i les 5 Regles d'Or de socket

• Garantia algorísmica i de seguretat: Actualització de registres amb sintaxi immutable s with field = val, resolució DNS sense glibc/libnss i codis d'estat deterministes (0 OK, -1 EOF, -2 TIMEOUT, -3 REFUSED).
• Complexitat de pila $O(1)$ amb TCO: Tots els bucles recursius a src/main/ridgun/lib/socket.rg estan en posició de cua, de manera que ridgunc els compila a salts natius sense creixement de pila.
• Memòria determinista (RMM1/RMM2): Zero pauses de recol·lector de brossa; totes les estructures intermèdies s'alliberen de forma determinista en sortir de l'àmbit.
• Verificació contínua: Provada exhaustivament amb stable check i la suite automatitzada src/test/ridgun/test socket.rg.

Les 5 Regles d'Or en programar amb socket

1. Declara import socket a l'inici del fitxer i aprofita l'equivalència entre espais i guions baixos perquè el teu codi es llegeixi com a prosa.
2. Alinea les teves canonades de dades amb =: encadena les crides a socket en passos amb nom propi i deixa que stable format alineï les columnes.
3. Aprofita les funcions totals de socket a les teves guardes |: comprova els valors de retorn o desembolica els ADTs amb pattern matching en lloc d'assumir que l'entrada externa sempre és vàlida.
4. Evita copiar grans estructures si només necessites consultar un camp: recorda que en RMM2 els arguments d'entrada no incrementen ni decrementen comptadors (+0 / -0).
5. Combina socket amb test (import test): escriu sempre assercions amb assert equals o assert true per fixar els invariants del teu domini.

---

Al Capítol 36 passarem a explorar en profunditat la lib http (La lib http — URIs RFC 3986, Codec HTTP/1.1 RFC 9112 i Client TCP en Viu).